Blind rivets

The tube mouth of the nail shell of the quick rivet has an enlarged head shape. A certain number of nail shells are packed in a paper bag in one direction. When used, a nail core is inserted, and rapid riveting is achieved through continuous riveting action, hence the name.

Usage scenarios

Because of its low clamping force and tensile strength, there is no tail burr and rivet body holes retained after installation. It is suitable for occasions with special requirements such as air permeability, heat dissipation, and quick installation of thin plates.

size

Performance Table

Surface treatment

Installation Method

1.1 Product installation steps

1) Select a pneumatic or battery-powered rivet gun with matching pulling force, install a nozzle with matching diameter specifications, and adjust the appropriate rivet stroke according to the installation thickness and tool manual;

2) Load the product and perform an empty pull test;

3) Perform a real rivet test on the test sheet metal, as shown in step 1 below.

4) Observe whether the clamping state of the product is normal after installation.

5) (To determine whether the installation fails, please refer to the following article – Product installation failure mode pictures)

1.2 Operation steps

Hold the product or the nozzle close to the tail of the rivet to automatically suck in the nail core and the rivet flange surface to ensure that it is close to the nozzle. Insert the tool into the installation hole in a direction perpendicular to the sheet metal plane and close to the sheet metal surface, then pull the trigger to start riveting until the nail core breaks. At this time, one riveting action ends, and then the next working cycle is carried out.

Details