Huck rivet
$100.00
Hack rivets, the product uses the principle of Hooke’s law. Under the action of unidirectional tension, the Hack gun stretches the nail rod and pushes the rivet cap end, squeezing the smooth material inside the rivet cap end into the screw groove to form a 100% combination of the rivet cap end and the nail rod, generating permanent fastening force. Designed for high-strength connections, it is a quick and easy way to prevent loosening. The complete riveting process generally takes only 5-8 seconds. This fastening solution is ideal for occasions where spot welding is not possible or suitable.
Product features:
1. Single-sided operation is possible, especially suitable for blind riveting, high efficiency, low noise, good seismic resistance, and wide application field.
2. It has high fastening force, strong shear resistance, tensile resistance, and seismic resistance;
3. Suitable for high-strength connections, sheet metal riveting with high seismic and loose requirements
Usage scenarios
Widely used in industrial production, such as car body manufacturing, railways, construction and containers. The main advantages of use include: large clamping force and stable performance, anti-loosening, good shock resistance, quick installation, high shear and tensile strength.
size
| Product Code | D | D1 | M | L | L1 | dk | P | d0 | h |
| Nominal | Min | Max | Nominal=Min | Max | Max | Min | |||
| B1131-068130 | 6.8 | 9.4 | 17.3 | 13 | 5.7 | 9.8 | 24 | 7.0-7.4 | 4.0-5.6 |
| B1131-068145 | 18.9 | 14.5 | 5.6-7.1 | ||||||
| B1131-068160 | 20.3 | 16 | 7.1-8.7 | ||||||
| B1131-068180 | 22.3 | 18 | 8.7-10.3 | ||||||
| B1131-068210 | 25.3 | 21 | 11.9-13.5 | ||||||
| B1131-068220 | 26.3 | 22 | 13.5-15.1 | ||||||
| B1131-086210 | 8.6 | 12.1 | 25.4 | 21 | 7.1 | 12.5 | 32.6 | 8.8-9.3 | 7.9-11.1 |
| B1131-100290 | 10 | 14.1 | 34.1 | 29 | 8.3 | 14.8 | 31.5 | 10.5-11.1 | 14.3-17.4 |
Performance Table
| Nominal diameter
D（mm） |
Tensile load
（N）Min |
Shear load
（N）Min |
| 6.8 | 14400 | 22700 |
| 8.6 | 22900 | 35800 |
| 10 | 32000 | 49300 |
Surface treatment
| variety | Material | Surface treatment | ||
| case | Nail core | case | Nail core | |
| Hack Rivet | SWCH8A | SCM435 | Galvanizing | Phosphate |
Installation Method
1.1 Product installation steps
1) Select a pneumatic or battery-powered rivet gun with matching pulling force, install a nozzle with matching diameter specifications, and adjust the appropriate rivet stroke according to the installation thickness and tool manual;
2) Load the product and perform an empty pull test;
3) Perform a real rivet test on the test sheet metal, as shown in step 1 below.
4) Observe whether the clamping state of the product is normal after installation.
5) (To determine whether the installation fails, please refer to the following article – Product installation failure mode pictures)
1.2 Operation steps
Hold the product or the nozzle close to the tail of the rivet to automatically suck in the nail core and the rivet flange surface to ensure that it is close to the nozzle. Insert the tool into the installation hole in a direction perpendicular to the sheet metal plane and close to the sheet metal surface, then pull the trigger to start riveting until the nail core breaks. At this time, one riveting action ends, and then the next working cycle is carried out.
